Brake controllers are not going to work as soon as you plug the trailer in. They will need to be configured. In fact, they will need to be configured each time your vehicle is connected up to the trailer.
This is because the trailer will weigh different amounts each time, and thus the settings of the brake controller will be slightly different. Now, for the most part, if you have a modern brake controller, then it will be able to calibrate itself.
It is able to measure the weight of the trailer and come up with some settings. If you have a wireless device, then you may be able to save these settings for later use. This means that if you are always carrying the same loads, then you will be able to skip the calibration process.
However, if you do have a brake controller, we do urge you to still keep an eye out for the way that the trailer behaves when you are driving.
This is the amount of force that the brake controller tells the electric brakes to brake at. The higher the gain, the more intense the braking process is. Of course, the higher gains are going to be used for trailers that weigh a lot more.
To counter this, many people suggest that you drive up and down a flat surface at no more than 25mph. As you drive up and down the flat area, you will want to keep an eye on the speed at which the trailer brakes.
If it is slow, then turn the gain up. You will want to keep turning the gain up until the trailer seems to be braking roughly in line with the actual vehicle.
This will often happen if the gain is high and the weight of the trailer is very low. If you do not use a brake controller, the brakes on your trailer will not work when you press the brake pedal of your towing vehicle. This can lead to your trailer flipping or other accidents. Jack-knifing, fish-tailing, and swaying are other dangerous factors commonly associated with trailer towing. There are a few more safety features to consider, as well.
Better stopping distance: With a brake controller, you improve the stopping distance of your vehicle while you are towing a travel trailer. This means that when you apply your brakes fully, it will take less time and distance for your vehicle to come to a complete stop.
There are many reasons you may need to come to a quick stop while towing a travel trailer, but accelerating and braking are both slower processes when towing is involved. So, the added security of a better stopping distance will help you feel safer on the road despite the added weight to your vehicle. Reduce wear on vehicle brakes: Avoiding potential damage to your trailer is another important thing to consider when making this purchase.
Increasing the weight applied to them increases the speed at which they wear down. Using a brake controller allows you to transfer some of the force your brakes endure onto the brakes of the travel trailer. Legal reasons: It is crucial to know the legal component of using a brake controller when towing your travel trailer.
Many states and Canadian provinces legally require you to use a brake controller when towing a trailer. Usually, these laws will be based on the weight and size of the trailer and could include other components, like requiring a breakaway kit. Make sure you know the legal requirements of your area before you take your travel trailer on the road. The Exception The only time you may not need a brake controller is if your trailer has surge brakes rather than electric brakes.
Conclusion To tow a travel trailer, you will need to purchase a brake controller to connect to your towing vehicle. Let me make it easier for you. It activates the brakes of your trailer by sending an electric signal even you apply brakes. You can find one of these in the dashboard area of the towing vehicle. It helps balance the engagement between the braking time if the towing vehicle and the trailer slow down or stop.
So, the real question you need to ask is, do I need a brake controller? The article answers this question for you and provides you with everything you need to know about brake controllers what difference to the make for your recreational vehicle. Having no brake controllers for trailers often leads to accidents and crashes, making them a piece of essential equipment for you to have.
The concept of strain is crucial for you to understand to get why brake controllers are necessary. When you tow a trailer without a controller, the braking strain is on the towing vehicle only. Think about this for a moment. You hit the brakes The tow vehicle will stop immediately, but the trailer has no braking system. The momentum will cause the trailer to keep moving, pushing the vehicle forward.
It will increase the braking distance and may even lead to a crash. A surge braking system works by activating the brakes based on the distance between the trailer and the tow vehicle.
If your trailer has electric friction brakes or an electric hydraulic trailer brake actuator, you will need brake controllers for your trailer. Brake response will begin once calibration is complete.
Now you can set and save up to 5 favourite programs accounting for load, driving conditions, driver preferences by swiping left from the Home Screen. Swipe right to select an existing program. The programs are saved within the Elecbrakes device on your trailer, so any changes made to programs will be accessible to other users when towing this trailer, even if they are using a different smartphone.
What makes Elecbrakes so innovative and different is that this electric brake controller is a trailer-mounted solution rather than an in-car one. The distinction may be a bit fuzzy until you think about the practicalities of towing. Say that, after years of research and saving up, you finally bought the caravan of your dreams. Caravans are durable goods, not to mention important investments, and chances are you are looking forward to using it for years to come.
Maybe you are even considering occasionally lending it to your kids and their families to go away for school holidays, or renting it out during its downtime Camplify [insert link to Camplify landing page] is excellent to this end when you are busy with other commitments, such as family or work. However, when the time comes and your relative, friend or renter pulls up in the driveway to collect your prized trailer, it dawns on both of you that things are not that simple after all.
In either case, a set of requirements needs to be fulfilled by the new car in order for it to be able to tow that caravan away. Should they then buy their own brake controller set with the incremental cost and installation process , or borrow your car alongside with your trailer? A mission and a half, all things taken into account! And what happens when you decide to upgrade your car to a newer model? We at Elecbrakes believe that towing does not need to be that complicated. In fact, towing should be all about the freedom and flexibility to match different vehicles to different trailers, as you choose.
Hence we have developed a unique solution: an electric brake controller mounted on the trailer rather than the tow vehicle. If you think about it, it makes sense: not all cars tow, but all trailers do get towed! No drilling the dashboard or hardwiring the vehicle of any sort. This is possible because Elecbrakes works via wireless Bluetooth technology: the trailer-installed component communicates wirelessly with the intuitive Elecbrakes app directly on your smartphone, which you will need to keep secured on its dashboard holder and within reach while you drive.
Anybody can download and quickly set up the Elecbrakes app, which is available for both Apple and Android, completely for free, so your only investment in terms of brake controller is the Elecbrakes device, to be mounted on your trailer.
In addition, the Elecbrakes app gives you the possibility to save up to 5 different settings road conditions, trailer load, etc. From here, any vehicle big enough to tow your caravan is free to do so, with minimum time and effort from everyone. Easy, right? It does not add to clutter, as all you need to have within the cab is your smartphone, which you will likely have with you anyways. Elecbrakes is also motion-sensing. The trailer-mounted, compact device employs a high-speed microprocessor connected to sensors, which continuously sample vehicle dynamics and other operating parameters at a thousand times per second.
Elecbrakes is the best solution when it comes to a high quality, practical, time and cost effective electric brake controller.
0コメント